Ricoh Aficio 401 Operating Instructions Manual page 86

Menu Reset - performs a Printer Reset function and restores some of
the menu settings to their system default values. You use the Reset
Menu function to restore to the default settings those values that have
been changed by users, while retaining those values set based on the
physical printer setup. The parameters that are not restored to the de-
fault values are as follows:
Bypass Tray Size
Bidirectionality
Baud Rate
Parity
Handshake
System Reset - performs a System Reset function and restores all of
the menu settings, except for Page Count, to the system default values.
Note: You should perform a System Reset when you first activate your
machine to make sure that all of the NVRAM system defaults are
initialized and set correctly.
When you press the [Execute] button for any of the reset functions, the
Confirmation screen displays.
Press the [Yes] button on the Confirmation screen to continue with the reset
function. The In Progress screen displays, notifying you that the reset
function is being performed.
When the reset function is complete, the Printer Priority Mode screen
displays and the machine status is set to Online and Ready.
If you performed a reset from the Reset Menu or from a System Reset, the
mode setting is set to Share.
USING THE CONTROL PANEL
DTR Polarity
Stop Bits
Data Bits
SCSI ID
Passwords
2-47