I/O Timeout Setting Screen
When you press the [Change] button for the I/O Timeout option, the I/O
Timeout Setting screen displays.
You use the numerical keys to change the value for the number of seconds
after which an incomplete print job should end and the next port in the
polling sequence should be set. The valid range is 5 to 300, entered in
increments of 1. The default is 30 seconds.
Serial Menu
When you press the [Serial Menu] button from the Setup menu, the Serial
menu displays. You use the Serial menu to set the serial interface configu-
ration parameters. Although most software applications override these pa-
rameters, when an application does not, the values that display on this
screen are used.
The options available on this screen are as follows:
Personality
Baud Rate
Parity
Handshake
USING THE CONTROL PANEL
DTR Polarity
Stop Bits
Data Bits
I/O Timeout
2-37