Parity Setting Screen; Handshake Setting - Ricoh Aficio 401 Operating Instructions Manual

Parity Setting Screen

When you press the [Change] button for the Parity option, the Parity Setting
screen displays.
You use this screen to specify how the parity bit is used during error
checking. The options are as follows:
None
Odd
Even
The default is None.
Note: You must set the parity for the serial port to the same parity setting
as the host.
Handshake Setting Screen
When you press the [Change] button for the Handshake option, the Hand-
shake Setting screen displays.
You use this screen to specify the type of handshake that occurs between
the serial port and the host. The options are as follows:
XON/XOFF
DTR/DSR
Robust XON
The default is XON/XOFF.
USING THE CONTROL PANEL
2-39