Ricoh Aficio 401 Operating Instructions Manual page 151

Message
Remove the paper in
the staple unit.
Serial communication
error. Please set up
communication
parameters again.
Shift tray is full.
Remove the copies.
The spooling area of
the disk is full. Press
[Continue] to resume
printing. The current
print job will be split.
Description
A paper jam has occurred in the
stapling area of the finisher.
A serial port communication error
occurred during printing.
A bin overflow occurred at the 1-bin
finisher.
The spooling area available on the
disk is full. Input spooling is
temporarily disabled due to lack of
room on the hard disk drive.
The spooling area of the disk
contains both spooling data and
page image data used for reverse
order and duplex printing. The
spooling area is limited to allow for
the space required by page image
data.
TROUBLESHOOTING
Action
Follow the instructions that display
to remove the paper jam from the
machine and press the [Continue]
button to continue printing.
Press [Reset] to cancel the print
job.
When Jam Recovery is set to Off,
the remainder of the print job is
cancelled and the next print job
prints when the paper jam is
removed.
Check the serial port settings.
When the serial port problem is
fixed, press [Reset] to cancel the
print job.
Remove the printed output from the
1-bin finisher. When the output is
removed, printing
automatically.
Press the [Continue] button to
complete printing of the pages
already sent to the disk. The
remaining data is then sent to the
hard disk and printed in the order
received. Therefore, although the
entire job prints, the output is not in
the order specified.
Press the [Reset] button to cancel
the print job.
Note: Since the printing of all pages
already sent to the disk, including
multiple copies, must complete
before the remaining data can be
sent, the final output is collated
incorrectly.
resumes
4-15