How To Set The Thread Clamp Operation While The Presser Foot Is In Its Upper Position - JUKI PLC-2760NVM Instruction Manual

16-3. How to set the thread clamp operation while the presser foot is in its upper position

When you want to use the thread clamp function, set the "Thread clamp function while the presser foot is in its up-
per position" to ON.
❶
1)
2)
3)
4)
5)
❷
– 31 –
❶ .
Press and hold
Select "1. Memory switch".
Press "5. During stopping".
Press "K141 Thread clamp operation while the
presser foot is in its upper position".
Enter "1".
❷ to confirm the setting.
Press