How To Set The Thread Clamp Operation While The Presser Foot Is In Its Upper Position - JUKI PLC-2710NVM Instruction Manual

14-3. How to set the thread clamp operation while the presser foot is in its upper position

When you want to use the thread clamp function, set the "Thread clamp function while the presser foot is in its
upper position" to ON.
❶
1)
2)
3)
4)
5)
❷
– 25 –
❶ .
Press and hold
Select "1. Memory switch".
Press "5. During stopping".
Press "K141 Thread clamp operation while the
presser foot is in its upper position".
Enter "1".
❷ to confirm the setting.
Press