Table of Contents
Advertisement
Operational faults
8
Operational faults
A sensor malfunction is indicated by the blinking icon on the display. The "Error" message is
displayed immediately. Press the rotary pushbutton to open the error level. It may be possible to
view several error messages by turning the rotary pushbutton. As long as an error message is
present, the error level is displayed, even though it has not been opened by pressing the rotary
pushbutton.
In the error level, the error message is displayed as specified in the list below (section 8.1).
Note: After the system code number has been changed or after restarting the controller, any er-
ror messages are suppressed for approx. three minutes.
8.1
Error list
4
Err 1 = Sensor failure (–> section 8.2)
4
Err 2 = Reserved
4
Err 3 = Disinfection temperature not reached (–> section 6.10)
4
Err 4 = Max. charging temperature reached (–> section 6.2)
4
Err 5 = Reserved
4
Err 6 = Temperature monitoring alarm (–> section 8.3)
4
Err 7 = Unauthorized access occurred (-> section 9.1)
All error messages, except for "Err 1" can be confirmed in the error level.
When an error message is indicated, proceed as follows:
1.
Select Clr on the display [q].
2.
Confirm the error message [ ].
78
EB 5573 EN
Hide quick links:
Advertisement
Table of Contents
