Samson TROVIS 5573 Mounting And Operating Instructions page 17

Note: Vacation periods can also be set in PA5 parameter level (–> section 2.3).
Deleting vacation periods:
1. Under data point for vacation periods, select the start date of the period you wish to de-
lete [q].
2. Confirm selection [ ].
3. Select – –.– – [q].
4. Confirm selection [ ].
The vacation period is deleted.
Note: Vacation periods should be deleted by the end of the year so that they are not carried on
into the following year.
Operation
17
EB 5573 EN