Table of Contents
Advertisement
Start-up
10. Confirm settings [ ].
If the function block is not closed, further function block parameters can be adjusted.
Proceed as follows:
a)
Select function block parameter [q].
b)
Confirm function block parameter [ ].
If applicable, the next function block parameter is displayed.
Confirm all parameters to exit the opened function block.
To adjust additional function blocks in the open configuration level, repeat the steps 6
to 10.
11. Select End [q].
12. Exit configuration level [ ].
To adjust additional function blocks in the other configuration levels, repeat 4 to 10.
13. Return the rotary switch to normal switch position
22
EB 5573 EN
(information level).
Hide quick links:
Advertisement
Table of Contents
