Setting The Times-Of-Use - Samson TROVIS 5573 Mounting And Operating Instructions

1.6

Setting the times-of-use

Three times-of-use can be set for each day of the week.
Parameters
Period/day
Start first time-of-use
Stop first time-of-use
Start second time-of-use
Stop second time-of-use
Start third time-of-use
Stop third time-of-use
* Default values (WE) valid for heating circuits
Proceed as follows:
1. Turn the rotary switch to
blinks.
4
For systems with just one control circuit (e.g. Anl 1.0), steps 2 to 5 can be skipped
(selecting the control circuit and specifying the DHW circuit).
4
Only the DHW circuit is controlled in systems Anl 1.5 and 1.9. Therefore the instruc-
tions steps 2 and 3 (selecting the control circuit) do not apply and can be skipped.
2. Select the control circuit, for which the times-of-use are to be entered [q]:
Heating circuit 1
Heating circuit 2
DHW circuit/circulation pump (DHW)
4
Only those control circuits are available for selection which can be controlled by the
system (Anl) selected.
3. Confirm the control circuit [ ].
4
If control circuit 1 or 2 has been selected, skip steps 4 and 5.
4. Specify DHW circuit [q]:
DHW heating /
5. Confirm [ ].
WE* Range of values
1–7 1–7, 1, 2, 3, 4, 5, 6, 7 with 1–7 = every day,
1 = Monday, 2 = Tuesday, ..., 7 = Sunday
6:00 0:00 to 24:00h; in steps of 15 minutes
22:00 0:00 to 24:00h; in steps of 15 minutes
22:15 0:00 to 24:00h; in steps of 15 minutes
22:15 0:00 to 24:00h; in steps of 15 minutes
– 0:00 to 24:00h; in steps of 15 minutes
– 0:00 to 24:00h; in steps of 15 minutes
(times-of-use).
Circulation pump (DHW)
Operation
11
EB 5573 EN