Setting The Party Mode - Samson TROVIS 5573 Mounting And Operating Instructions

1.7

Setting the party mode

Using the Party mode function, the controller continues or activates the day mode during the
time when the party timer is active, regardless of the programmed times-of-use. When the party
timer has elapsed, the party mode timer is reset to 00:00.
Parameter
Continue/activate rated operation
Proceed as follows:
1. Turn the rotary switch to
blinks.
4
In systems Anl 1.0, 1.9 and 3.5, the display reads 00:00 or indicates the remaining
time of party timer. Steps 2 and 3 can be skipped (selecting the control circuit).
2. Select the control circuit in which the day mode is to continue or be activated [q]:
Heating circuit 1
Heating circuit 2
DHW circuit
4
Only those control circuits are available for selection which can be controlled by the
system (Anl) selected.
3. Confirm the control circuit [ ].
Display: 00:00 or indicates the remaining time of party timer.
4. Select how long the day mode is to continue running [q].
This setting is made in steps of 15 minutes.
5. Return the rotary switch to normal switch position
Note: The party timer counts down in steps of 15 minutes.
WE
0 h
(party mode).
Range of values
0 to 48 hours
(information level).
Operation
13
EB 5573 EN