4. System Maintenance
Security
Administrator Authentication
Specify whether or not to set administrator authentication. An administrator
password is required to change this setting.
If administrator authentication is set, a password is required for the following
operations:
• Changing [Transmission WEP Key Number], [Network Key], [EAP Type],
[Client Certificate User Name], [MS-CHAP v2 User Name], [MS-CHAP v2
Password], [Windows Domain Name], [Server Certificate Authentication],
[Intermediate CA Permission], [Crestron WebUI User Auth.], [Crestron
WebUI User Password], [Crestron WebUI Admin. Auth.], [Crestron WebUI
Admin. Password], [PJLink Authentication], and [PJLink Password]
• Using the simple wireless LAN setup function and Network Setting Wizard
• Importing, deleting, or displaying client or CA certificates
• Turning the projector on or off via a network
• Changing the settings using Web Image Monitor
• Executing [Reset Security Settings]
Administrator Password
Enter the administrator password. Up to 32 alphanumeric characters can be
used. The current password is required to change the administrator password.
Application Authentication
When projecting images using an application installed on a smart device,
specify whether or not to enter the application password.
Application Password
Enter the password to be used for Application Authentication.
Up to 32 alphanumeric characters can be used.
158
Item
Default
Off
(blank)
Off
(blank)