Ricoh PJ WX4152 Field Service Manual page 153

Transmission WEP Key Number
Select the key number used to authenticate and encrypt transmissions when
you select [WEP] in [Encryption Method].
• 1
• 2
• 3
• 4
Network Key
Enter the WEP key when you select [Open System] or [WEP Shared Key] in
[Authentication Method] and select [WEP] in [Encryption Method].
When using 64 bit WEP, up to 10 characters can be used for hexadecimal
and up to 5 characters for ASCII. When using 128 bit WEP, up to 26
characters can be used for hexadecimal and up to 13 characters for ASCII.
Enter PSK when [WPA/WPA2-PSK] or [WPA2-PSK] is selected in
[Authentication Method].
When using a PSK, up to 64 characters can be used for hexadecimal and 8
to 63 characters for ASCII.
EAP Type
Specify the WPA/WPA2-EAP type when [WPA/WPA2-EAP] or [WPA2-
EAP] is selected in [Authentication Method]. You can select EAP-TLS or EAP-
PEAP.
• EAP-TLS
A client certificate and a CA certificate must be imported to the
projector.
• EAP-PEAP
A CA certificate must be imported to the projector.
Import Client Certificate
Imports the client certificate used for WPA/WPA2-EAP or WPA2-EAP when
[EAP-TLS] is selected in [EAP Type].
Item
Menu List
Default
1
(blank)
EAP-TLS
-
151