Ricoh PJ WX4152 Field Service Manual page 169

Error
Status / LED display
ID
[Status]
The lamp turned off during
use, or does not turn on.
[LED display]
62
[A] Lamp [B] Temp
Flashing interval: 0.2
seconds
[Status]
The lamp turned off during
use, or does not turn on.
64
[A] Lamp [B] Temp
Flashing interval: 0.2
seconds
[Status]
The lamp turned off during
use, or does not turn on.
[LED display]
66
[A] Lamp [B] Temp
Flashing interval: 0.2
seconds
Cause
PSU defect / failure Replace the PSU. (page 75 "PSU")
Replace the ballast. (page 87
Ballast defect
"Lamp Ballast")
PSU defect / failure Replace the PSU. (page 75 "PSU")
LED Display / Error ID
Solution
167