2. Installation
Step
2
3
4
Enabling Interactive Mode
In Interactive Mode, the projector can recognize the electronic pen and the computer USB adapter.
We recommend disabling wireless LAN communication when you enable Interactive Mode.
To disable wireless LAN communication, select [Wired LAN] or [Disable] in [Network Interface] under
[Network Settings].
1.
Turn on the projector to project the screen.
2.
Press the [Menu] button.
3.
Select [Default Settings 1], and then press the
4.
Select [Interactive], and then press the [Enter] button.
5.
Select [Interactive Mode], and then press the [Enter] button.
50
Register the computer USB adapter to the projector.
Enable the projector to recognize the electronic pen.
Install RICOH PJ Interactive Software on a computer.
Setting Contents
button.