Ricoh PJ WX4152 Field Service Manual page 117

2. Press and hold the [Enter] and [Menu] buttons of the projector simultaneously for
two seconds.
3. Press the button two times.
4. Press the button.
5. Press and hold the [Enter] button for two seconds.
The password will reset.
When using the remote control
1. Connect the power cable and hold down the [ON/STANDBY] button to display the
password input window.
2. Press the [1] button three times.
3. Press the [Enter] button four times.
4. Press the [1] button five times.
5. Press the [Enter] button four times.
The password will reset.
• If the password failed to be reset, repeat the procedure from step 1.
• The password will be "000000" after reset.
Electrical Adjustment
115