Electronic Pen - Ricoh PJ WX4152 Field Service Manual

Step Check item
9 Point the electronic
pen nib toward the
projected screen
and check to see
whether the
electronic pen is
recognized by the
projector.
When the projected screen cannot be operated as wanted, do the following solutions.
Problem
The location the pen nib
points at does not
correspond with what is
displayed on the screen.

Electronic Pen

Problem
The electronic pen is not
working correctly.
The electronic pen is not
working correctly.
The electronic pen is not
working correctly.
If the electronic pen is recognized correctly, the pointer on the
projection screen will move in unison with the movement of the
electronic pen.
• Change the display settings using the computer's graphic driver,
so that the screen projected is not scaled by the computer.
(Example: Display > General Settings > Scaling > Maintain
Display Scaling)
• Change the computer output settings so that only the projector
screen is displayed.
For details about settings, see the computer manual.
The electronic pen may not work correctly if it is pointed at a
shadowed area on the screen. Try to keep the screen from being
shadowed and point it at an unshadowed area.
The electronic pen may not work correctly if the surrounding area is
too bright. Dim the surrounding lights.
The Interactive Tool Kit may not work correctly if other Bluetooth/
wireless LAN devices are used nearby.
Try not to use the kit in the vicinity of such devices.
Check Point of Each Problem for Solution
Solutions
Solutions
Solutions
191