Ricoh PJ WX4152 Field Service Manual page 140

4. System Maintenance
Wall Color Mode
Select the image hue according to the projection surface when the image is
being projected on something other than a screen.
• Off
• Whiteboard
• Beige
• Gray
• Blackboard (Green)
3D Projection > 3D Projection
Specify whether or not to use 3D projection.
The image will be slightly darker if this is set to [On].
3D projection and interactive mode cannot be enabled simultaneously. If you
change this setting to [On], [Interactive Mode] in [Default Settings 1] is
switched to [Off].
3D Projection > L/R Reverse
Specify whether or not to reverse left and right in a 3D image.
• Normal
• Reverse
3D Projection > 3D Format
Select a 3D format.
Select [Auto] when the 3D signals are input through HDMI. If the image does
not project in 3D even if [Auto] is selected, change the setting to match the 3D
format of the signal being input.
• Auto
• Frame Sequential
• Side by Side
• Top and Bottom
• Frame Packing
138
Item Default
Off
Off
Normal
Auto