Ricoh PJ WX4152 Field Service Manual page 167

Error
Status / LED display
ID
[Status]
The lamp does not turn on
correctly.
[LED display]
36
[A] Lamp [B] Temp
Flashing interval: 1 second
[Status]
The lamp turned off during
use.
[LED display]
26
[A] Lamp [B] Temp
Flashing interval: 1 second
[Status]
The lamp turned off during
use.
[LED display]
61
[A] Lamp [B] Temp
Flashing interval: 1 second
Cause
• Apply vibration to the lamp
Mercury bridge*1
has occurred.
• Replace the lamp. (page 61
Replace the parts as described below, in the order of
appearance below.
Lamp defect / Replace the lamp. (page 61 "Lamp
failure / life expired Unit")
Ballast defect / Replace the ballast. (page 87
failure "Lamp Ballast")
PSU defect / failure Replace the PSU. (page 75 "PSU")
The lamp is Replace the lamp. (page 61 "Lamp
degraded. Unit")
LED Display / Error ID
Solution
unit by shaking it 5 times side
to side about 30 cm across.
"Lamp Unit")
165