Usb Settings Menu (Pj Wx4152N/Wx4152Ni) - Ricoh PJ WX4152 Field Service Manual

Start on Input Detection
Specify whether or not to start projecting automatically if the signals are input
while in standby.
High Altitude Mode
The number of fan rotations is high when set to [On]. The air is thin at high
elevations, so the cooling efficiency of the projector is reduced. Select [On]
when using the projector at an altitude of more than 1,500 meters (4,921
feet). Do not select [On] when the altitude is less than 1,500 meters (4,921
feet).
Key Lock
Specify whether or not to lock the buttons on the control panel. You can
change this setting to [Off] by pressing the [AV Mute] button on the projector's
control panel for 10 seconds.
Reset All
Reset all menus to their defaults.
This function cannot restore the default settings of [User Logo] in [Default
Settings 1], [Current Time] and [Startup Password] in [Default Settings 2],
[Administrator Authentication] and [Administrator Password] in [Network
Application Settings].
Startup Password > Register Password
Enter a 6-digit password. The current password is required to change the
password.
Startup Password > Password Protect
Specify whether or not to enter a password when the projector is turned on. If
this is selected, a password must be entered when the projector is turned on
after the power cord has been unplugged. However, a password is not
required when turning the projector on from the standby mode.
A password is required to change this setting.

USB Settings Menu (PJ WX4152N/WX4152NI)

This section explains the items in the USB Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the USB Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
Item
Menu List
Default
On
Off
Off
-
000000
Off
145