Interactive Function - Ricoh PJ WX4152 Field Service Manual

Problem
Wired LAN is disabled.
(WX4152N/WX4152NI)
Wireless LAN is disabled.
(WX4152N/WX4152NI)

Interactive Function

If you cannot use the interactive function, follow the steps below in the specified order to troubleshoot
the problem.
Step Check item
1 Check the projector
to make sure that
power is supplied to
it.
2 Check to see
whether the
projector is in
Interactive Mode.
Check the settings of [Wired LAN Settings] in [Network
Settings] under "Network/USB Settings".
For details, see the Operating Instructions.
• Check the settings of [Wireless LAN Settings] in [Network
Settings] under [Network/USB Settings].
• Make sure there is nothing placed between the computer
and the projector.
• Make sure the operating system of the computer is
compatible with QuickProjection.
• To project images by ad hoc wireless communication,
log on to the computer with administrator privileges.
• Make sure that the projector is not in standby.
• Move the projector and access points closer to each
other.
• Make sure the access point and projector are close to
each other, and move devices that emit radio signals
such as microwave ovens further away.
If the projector is not supplied with power, check the power cord for
connection and turn on the power.
If Interactive Mode is set to [Off], switch it to [On].
For details about how to check whether the projector is in Interactive
Mode, as well as how to spec.
Check Point of Each Problem for Solution
Solutions
Solutions
189