4. System Maintenance
Transmission Speed
Select a wired LAN speed that matches your network environment. It is
recommended that [Auto-Negotiation] be selected.
• Auto-Negotiation
• 10BASE-T Full Duplex
• 10BASE-T Half Duplex
• 100BASE-TX Full Duplex
• 100BASE-TX Half Duplex
TCP/IP Settings
DHCP
Specify whether to enable or disable DHCP.
The IP address is allocated automatically from the DHCP server when
[Enable] is selected. When [Disable] is selected, enter the IP address, subnet
mask, and default gateway manually.
IP Address
Enter the projector's IP address.
Subnet Mask
Enter the subnet mask.
Default Gateway
Enter the default gateway.
Wireless LAN (PJ WX4152N/WX4152NI)
Simple Settings
Simple Wireless LAN Setup
Acquire the wireless LAN settings registered in the access point, and specify
infrastructure mode wireless LAN settings for the projector automatically.
This function may not work depending on the access point.
148
Item
Item
Item
Default
Auto-Negotiation
Default
Enable
0.0.0.0
0.0.0.0
0.0.0.0
Default
-