Ricoh PJ WX4152 Field Service Manual page 143

Power on Standby
Specify whether or not to save energy while in standby.
• Eco
You can save energy while in standby, but start-up time is slower.
• Q'ck On
You can turn on the projector quickly, but the standby energy level is
higher.
NW Settings on Standby (PJ WX4152N/WX4152NI)
Select a network function to be enabled while in standby. You can save
energy by disabling the network function.
This function is available when you select [Eco] in [Power on Standby].
• Do not Use
Disable the wired LAN and the wireless LAN while in standby to save
energy. To use the wired LAN or the wireless LAN, press the [Power]
button to turn on the projector.
• Wired LAN
You can turn on the projector from standby mode via a wired LAN.
• Wired/Wireless LAN
You can turn on the projector from standby mode via a wired LAN or
wireless LAN.
• The image may flicker, depending on the characteristics of the lamp, when the lamp power is cut
by the lamp settings. If this happens, specify the lamp settings as follows:
• Lamp Power: Stnd.
• Lamp Pwr on No Signal: Stnd.
• Image Eco: Off
Item
Menu List
Default
Eco
Wired LAN
141