4. System Maintenance
Power Timer > Projection Day
Select a day of the week to start projecting using the power time function.
Power Timer > Projection Time
Specify the time to start and end projecting using the power timer function. An
interval of at least ten minutes is required between the startup time and the end
time.
Projection Mode
Select the projection method according to how the projector is positioned.
• Standard
Select this mode when the projector is placed in front of a screen.
• Rear
Select this mode when the projector is placed behind a screen.
• Ceiling
Select this mode when the projector is mounted on the ceiling in front of a
screen.
• Rear Ceiling
Select this mode when the projector is mounted on the ceiling behind a
screen.
Remote Control ID
Select the projector remote control ID. Specify the ID for each projector when
operating multiple projectors using one remote control.
• 1
• 2
• 3
• 4
Direct Power On
Select the power on method of the projector.
• Off
Turn the projector on when the [Power] button is pressed.
• On
Automatically turn on the projector when the power cord is connected.
144
Item
Default
(Not programmed)
(Not programmed)
Standard
1
Off