3.
Remove the control terminal cover [A] (tabs x 2).
[A] : The control terminal cover
4.
Connect the other end of the USB cable to your computer.
5.
While holding down the [Input] and [AV Mute] buttons, plug in the power cord.
6.
Start Ricoh Projector FW Update Tool on your computer.
7.
Click [Tool] and then [COM Port]. Select the number of the COM Port that has been
created in Step 1, and then click [OK].
Check the number of the created COM Port from [Control Panel] - [Hardware and Sound] -
[Device Manager] - [Ports (COM & LPT)].
Firmware Update
119