Ricoh PJ WX4152 Field Service Manual page 179

Error
Status / LED display
ID
[Status]
"The hardware error has
occurred. The power timer
function is not available."
was displayed and the
power timer function does
35
not work.
Projection is possible after the
message is closed.
[LED display]
None
[Status]
"The network error has
occurred. The network and
USB memory functions are
not available." was
displayed and the network or
USB memory function does
18
not work.
Projection is possible after the
message is closed except for
the network or USB memory.
[LED display]
None
Cause
Battery has run out Replace the network board.
on the network (page 81 "Network Board (PJ
board WX4152N/WX4152NI)")
• Turn off the power and turn it
• Turn off the power and update
Software error
Replace the network board.
Hardware error (page 81 "Network Board (PJ
WX4152N/WX4152NI)")
LED Display / Error ID
Solution
back on.
the firmware. (page 81
"Network Board (PJ
WX4152N/WX4152NI)")
177