5. Troubleshooting
Error
Status / LED display
ID
[Status]
"The hardware error has
occurred. The interactive
function is not available."
was displayed and the
interactive function does not
32
work.
Projection is possible after the
message is closed.
[LED display]
None
[Status]
"The hardware error has
occurred. The power timer
function is not available."
was displayed and the
power timer function does
34
not work.
Projection is possible after the
message is closed.
[LED display]
None
[Status]
"The hardware error has
occurred. The power timer
function is not available."
was displayed and the
power timer function does
37
not work.
Projection is possible after the
message is closed.
[LED display]
None
176
Cause
Connection error of
Check the connection of the
the projector
projector adapter.
adapter
Projector adapter
Replace the projector adapter.
defect / failure
Replace the network board.
Hardware defect /
(page 81 "Network Board (PJ
failure
WX4152N/WX4152NI)")
Hardware defect /
Replace the main board. (page 89
failure
"Main Board")
Solution