Ricoh PJ WX4152 Field Service Manual page 151

Wireless LAN Settings
Wireless LAN
Specify whether to enable or disable wireless LAN.
Communication Mode
Select the wireless LAN communication mode.
• Infrastructure
Select this mode when you want to connect the projector to a wireless
LAN network. You need to specify [SSID] and items in [Security] and
[TCP/IP Settings] in this mode.
• Adhoc
Select this mode when you want to connect the projector and the
computer directly. The projector specifies [SSID] and items in [Security]
and [TCP/IP Settings] automatically in this mode.
SSID
Enter the SSID to connect to a wireless LAN network when
[Infrastructure] is selected. Enter up to 32 characters.
Channel
Select the channel to use when [Adhoc] is selected.
Select the channel that matches the type of wireless LAN being used.
The channels available might differ depending on the country.
• 2.4 GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
TCP/IP Settings
DHCP
Specify whether to enable or disable DHCP.
The IP address is allocated automatically from the DHCP server when
[Enable] is selected. If you select [Disable], manually enter the IP address,
subnet mask, and default gateway.
IP Address
Enter the projector's IP address.
Item
Item
Menu List
Default
Enable
Adhoc
(blank)
11
Default
Disable
0.0.0.0
149