• are automatically applied when you close the menu screen. You do not need to press the [Enter]
button.
• Settings in the Network/USB Settings menu are not applied until you select [Reflect] on the
confirmation screen.
• The menu screen is not accessible if you are projecting images from a USB memory device or
server. Stop projecting the images to open the menu screen.
Interactive Function
• To use the interactive function, you must use an RGB cable or an HDMI cable to connect the
projector and computer. You cannot use the interactive function if another type of cable is used for
the connection.
• The interactive function cannot be used when a screen is displayed on the Windows extended
desktop.
Set the interactive function
The interactive function allows you to operate a computer connected to the projector directly on the
projection screen. You can also write and draw on a projected screen using the included software
"RICOH PJ Interactive Software".
To use the interactive function, the following settings are required.
• You only need to perform Steps 1 to 3 to use the electronic pen to operate the computer from its
projected image.
• You must perform Steps 1 to 4 to write and draw on the screen.
Step
1
Set Interactive Mode to [On].
Setting Contents
Projector Installation
49