Configuration Of The Aop30 Operator Panel; Define Operation Screen - Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Operating And Installation Instructions

8.3.2

Configuration of the AOP30 operator panel

8.3.2.1

Define operation screen

Depending on the type of drive, an operation screen with ten different display parameters is the
default.
Figure 8-4
You can customize the display of the operation screen. The following types of display are
available:
● Values
● Bars
● Mixed
Defining the operation screen
1. Press the <Change> function key. The "Operation screen" menu opens.
2. Press the <▲> or <▼> function key to select the "Screen 2" entry. Then press the <Change>
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER
Example of the operation screen
– 2 digital values
– 10 values
The order of the entries in this screen determines the order of the operating variables
(parameters) displayed in the operation screen.
– 3 bars
– 8 values / 1 bar
– 4 values / 2 bars
Order of the display: First the parameters to be displayed digitally and then the
parameters to be displayed as bars.
function key to change the "Active" setting.
8.3 Operation via the AOP30 operator panel
Operation
113