Control Module "Simodrive 611 Universal - Siemens SIMODRIVE 611 Planning Manual

05.01
5.7

Control module "SIMODRIVE 611 universal"

Description
The control module "SIMODRIVE 611 universal" is used in the SIMODRIVE 611
system and includes two independent drive controls. However, the board can
also be operated in the one–axis mode or in one–axis power modules.
All of the drive–specific settings on the control board can be made as follows:
S
S
S
Note
The control module is described in detail in:
Reference:
 Siemens AG 2001 All rights reserved
SIMODRIVE 611 Planning Guide (PJU) – 05.01 Edition
5.7 Control module "SIMODRIVE 611 universal"
using the "SimoCom U" parameterizing and start–up tool
using the display and operator unit on the front of the module
via PROFIBUS–DP (parameter area, PKW area)
/FBU/, Description of Functions SIMODRIVE 611 universal
5 Control Modules
5-127
5