Ambient Conditions - Siemens SIMODRIVE 611 Planning Manual

Drive converter
Hide thumbs Also See for SIMODRIVE 611:
Table of Contents

Advertisement

05.01
2.2

Ambient conditions

Note
The components are insulated according to DIN EN 50178.
Overvoltage Class III
Degree of pollution II
Installation altitude up to max. 2000 m above sea level
Installation altitude, 2000 m – 5000 m possible when an isolating transformer is
used
The unit must be de–rated when installed above 1000 m.
Refer to Section 6.3.1 and Section 4.1.1.
Neutral point of the line supply is directly grounded; the module housing is also
grounded.
Warning
!
The I/R modules (Order No. 6SN114V–1VV0V–0VV1) are set for sinusoi-
dal current operation when they are shipped from the factory:
Please observe the commutating reactor or line filter data in Section 7.
Table 2-1
Ambient conditions
Designation
S
Vibration and
Vibration stressing in operation
shock stressing
Frequency range
in operation
10 ... 58 Hz
Frequency range
between 58 ... 500
Hz
Applicable standards
S
Shock stressing in operation
Acceleration
Shock duration
Applicable standards
Vibration stres-
Frequency range
sing during
5 ... 9 Hz
transport
Frequency range
between 9 ... 500 Hz
Applicable standards
S
Protection
Modules with internal cooling
S
against the
Modules with external cooling/hose cooling
ingress of
Heatsink in the cooling area
foreign bodies
and water
Electronics area
 Siemens AG 2001 All rights reserved
SIMODRIVE 611 Planning Guide (PJU) – 05.01 Edition
Description
With constant deflection = 0.075 mm
With constant acceleration = 9.81 m/s
IEC 65A (Co) 22–l, DIN IEC 68–2–6,
Severity grade, Class 12 acc. to EN 60721 Part 3–0 and Part 3–3
2
49 m/s
(5 g)
Modules/devices without drive (hard disk, floppy disk): 11 ms
Modules/devices with drive (hard disk, floppy disk):
IEC 65A (Co) 22–I
Shock immunity, acc. to IEC 60068 2–27
With constant deflection = 3.5 mm
With constant acceleration = 9.81 m/s
DIN IEC 68–2–6, IEC 65A (Co) 22–l
Severity grade according to EN 60721 Part 3–0 and Part 3–2
Note:
The data are valid for originally packaged components
2 System Configuration
2.2 Ambient conditions
2
(1 g)
30 ms
2
(1 g)
IP20
IP 54
IP20
2
2-25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents