Control Module For 1 Or 2 Axes - Siemens SIMODRIVE 611 Planning Manual

05.01
5.7.1

Control module for 1 or 2 axes

Control modules
The following 2 axis control modules are available:
for 2 axes
2–axis for encoders with sin/cos 1Vpp



The following is valid for screws:
Tighten (for the shield contact)
Max. torque = 0.8 Nm
Fig. 5-8 Control modules for 2 axes
 Siemens AG 2001 All rights reserved
SIMODRIVE 611 Planning Guide (PJU) – 05.01 Edition
5.7 Control module "SIMODRIVE 611 universal"


Module for
encoder evaluation



X302
Slot for
S
optional TERMINAL
modules
or
S
optional PROFIBUS–DP
module

S
Interfaces
S
Terminals,
S
Switch

Memory module

S
Firmware
S
User data

Display and
operator unit


Pulse interface
Equipment bus
The following applies for plug connections:
In order that the plug connections with the same number of pins
cannot be incorrectly inserted, they must be appropriately coded.
5 Control Modules
2–axis for resolvers



5
X302


5-129