Table of Contents
Advertisement
UG-20031 | December 2017
3 Generating the Intel Stratix 10 MX HBM2 IP
You can generate and parameterize the HBM2 IP using the Intel Quartus
Edition software, version 17.1 and later.
1. Before generating the HBM2 IP, you must create a new project:
a. Launch the Intel Quartus Prime Pro Edition software.
b. Launch the New Project Wizard by clicking File
c.
Type a name for your project in the Directory, Name, Top-Level Entity
field.
d. In the Project Type section, select Empty Project.
e. In the Add Files section, click Next.
f.
In the Family, Device, and Board Settings section, select Stratix 10 MX
as the device family.
g. Under Available Devices, select any MX device and your desired speed
grade.
h. Click Next and follow the Wizard's prompts to finish creating the project.
2. In the IP Catalog, open Library
3. Select High Bandwidth memory (HBM2) Interface and launch the parameter
editor.
Figure 6.
Selecting High Bandwidth Memory Interface in the IP Catalog
Intel Corporation. All rights reserved. Intel, the Intel logo, Altera, Arria, Cyclone, Enpirion, MAX, Nios, Quartus
and Stratix words and logos are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other
countries. Intel warrants performance of its FPGA and semiconductor products to current specifications in
accordance with Intel's standard warranty, but reserves the right to make changes to any products and services
at any time without notice. Intel assumes no responsibility or liability arising out of the application or use of any
information, product, or service described herein except as expressly agreed to in writing by Intel. Intel
customers are advised to obtain the latest version of device specifications before relying on any published
information and before placing orders for products or services.
*Other names and brands may be claimed as the property of others.
New Project Wizard.
Memory Interfaces and Controllers.
®
Prime Pro
ISO
9001:2008
Registered
Advertisement
Table of Contents
