Intel Stratix 10 MX HBM2 IP User Manual page 13

2 Intel Stratix 10 MX HBM2 Architecture
UG-20031 | December 2017
Power down enable
To conserve power, the HBM2 controller can enter power-down mode when the bus is
idle for a long time. You can select this option if required.
HBM2 Controller features enabled by default
The HBM2 controller enables the following features by default:
• DBI – The DBI option supports both write and read DBI, and optimizes SI/power
consumption by restricting signal switching on the HBM2 DQ bus.
• Parity – Supports command/address parity and DQ parity.
Related Links
• Clock Signals
• Intel Stratix 10 MX HBM2 Architecture
on page 30
on page 6
® ®
Intel Stratix 10 MX HBM2 IP User Guide
13