Suzuki WagonR+ RB310 Service Manual page 1190

1
2
2, (b)
1, (a)
12) Remove transfer rear mounting bracket (2) with transfer rear
mounting (1) from transfer assembly.
MOUNTING
Reverse dismounting procedure for installation noting the follow-
ing.
1) Tighten transfer mounting bolts (3) to specified torque.
Tightening torque
Transfer mounting bolt (a): 55 N·m (5.5 kg-m, 40.0 lb-ft)
1. Transaxle
2. Transfer assembly
2) Tighten transfer rear mounting bracket No.2 bolts (1) and
transfer rear mounting bracket nuts (2) to specified torque.
Tightening torque
Transfer rear mounting bracket No.2 bolt
(a): 55 N·m (5.5 kg-m, 40.0 lb-ft)
Transfer rear mounting bracket nut
(b): 55 N·m (5.5 kg-m, 40.0 lb-ft)
1, (a)
3) Tighten transfer rear mounting bracket bolts (1) to specified
torque.
Tightening torque
Transfer rear mounting bracket bolt
(a): 55 N·m (5.5 kg-m, 40.0 lb-ft)
TRANSFER 7D-5