Restore The Factory Configuration - Emerson Micro Motion 2700 Configuration And Use Manual

Introduction to configuration and commissioning
Tip
Write-protecting the transmitter prevents accidental changes to configuration. It does not prevent
normal operational use. You can always disable write-protection, perform any required configuration
changes, then re-enable write-protection.
3.5

Restore the factory configuration

Display
ProLink II
ProLink III
Field Communicator Not available
Overview
Restoring the factory configuration returns the transmitter to a known operational
configuration. This may be useful if you experience problems during configuration.
Tip
Restoring the factory configuration is not a common action. You may want to contact Micro Motion
to see if there is a preferred method to resolve any issues.
22
Not available
ProLink > Configuration > Device > Restore Factory Configuration
Device Tools > Configuration Transfer > Restore Factory Configuration
Micro Motion
®
Model 2700 Transmitters with Analog Outputs