Dv Connecting Cable - Sony Handycam Digital8 DCR-TRV238E Operating Instructions Manual

Dubbing only desired scenes
– Digital program editing
(on tapes)
Step 2: Setting the VCR to operate
with the i.LINK cable

(DV connecting cable)

When you connect using i.LINK cable (DV
connecting cable) (optional), follow the
procedure below.
(1) Set the POWER switch to PLAYER on your
camcorder.
(2) Turn the power of the connected VCR on,
then set the input selector to DV input. When
you connect a digital video camera recorder,
set its power switch to VCR/VTR.
(3) Press MENU to display the menu settings.
(4) Turn the SEL/PUSH EXEC dial to select
then press the dial.
(5) For DCR-TRV238E/TRV239E:
Turn the SEL/PUSH EXEC dial to select
VIDEO EDIT, then press the dial.
For DCR-TRV340E:
Turn the SEL/PUSH EXEC dial to select
TAPE in VIDEO EDIT, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select EDIT
SET, then press the dial.
(7) Turn the SEL/PUSH EXEC dial to select
CONTROL, then press the dial.
(8) Turn the SEL/PUSH EXEC dial to select
i.LINK, then press the dial.
(1)
(2)
,
(3)
(4)
(5)
(6)
(7)
(8)
105