Static Ip Source Guard Table - Planet Networking & Communication XGS-6320 Series User Manual

 Max Dynamic Clients
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

4.6.8.2 Static IP Source Guard Table

This page provides Static IP Source Guard Table. The Static IP Source Guard Table screen in
The page includes the following fields:
Object
 Delete
 Port
 VLAN ID
 IP Address
 MAC Address
Buttons
: Click to add a new entry to the Static IP Source Guard table.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Specify the maximum number of dynamic clients can be learned on given ports.
This value can be 0, 1, 2 and unlimited. If the port mode is enabled and the value
of max dynamic client is equal 0, it means only allow the IP packets forwarding
that are matched in static entries on the specific port.
: Click to translate all dynamic entries to static entries.
Figure 4-6-8-2: Static IP Source Guard Table Screen Page Screenshot
Description
Check to delete the entry. It will be deleted during the next save.
The logical port for the settings.
The VLAN ID for the settings.
Allowed Source IP address.
Allowed Source MAC address.
User's Manual of XGS-6320 Managed Switches
401
Figure 4-6-8-2 appears.