Start And Exit Configurator El500 - Panasonic ELC500 User Manual

5.1.3

Start and Exit Configurator EL500

1) Connect PC to be used for setup with ELC500. There are 2 ways to connect.
[1] Directly connect via USB cable to LAN cable.
[2] Connect via LAN cable using HUB.
Point
Both of cross cable and straight cable can be used for ELC500 to connect to PC.
2) Power on after it set to STOP/PROG. mode.
3) Start Configurator EL500.
Select from start menu.
'Panasonic-ID SUNX Control' → 'Configurator EL500' → 'Configurator EL500'
Start Configurator EL and the below window will be appeared. There are 3 functions.
1
1. New file
You can create new setup for ELC500.
2. Read out from ELC500
You can read out setup data from ELC500.
3. Open file
You can read out setup data from saved file.
USB or
LAN cable
HUB
3
2
40
ELC500 Control unit