Panasonic ELC500 User Manual page 97

■How to add destinations
Register destination groups to send mail.
Up to 8 groups can be registered.
Double-click the vacant line (b) at the mail group setup window.
Item
(a) Group name
(b) Address
*1 Enter 1 address for 1 line. After that, new line is added.
Every time you add new address, it uses area for 1-letter.
Ex.) Register 1 address: up to 256-letter can be used
Register 2 addresses: up to 255-letter can be used
Register 3 addresses: up to 254-letter can be used
Note
- In order to send mail, it is necessary to setup Ethernet of ELC500. Refer to 5.6.1.2.
- For using this function, set mail sending cycle 5-min or more.
- When attached file name has space, it can't send mail. If there is no attachment, confirm
your network administrator.
- When it failed to send file, you can retry by setting. It will retry send mail only attached the
first failed file. It can't send files created during the retry period.
Description
Set destination group name.
<Set range> 64-letter or less
*1 Set destination address.
<Set range> 256-letter of less
(a)
(b)
(total of all registered address)
89
ELC500 Control unit