Panasonic ELC500 User Manual page 90

Item
(g) Conditions
(h) Recovery
*1 It displays communication I/F that device is registered.
*2 It displays registered devices.
*3 It differs according to communication protocol of connected device.
*4 It can select LD, SV, and EV only when COM0, COM1, COM2 or Ethernet is selected.
*5 Set with hexadecimal.
*6 Only when device with MODBUS RTU or MODBUS TCP is selected.
Only when one of the following data styles is selected.
DEC2W, DEC2W (Unsigned),
DEC4W, DEC4W (Unsigned),
single precision real number
double-precision real number
*7 Set range differs according to data style.
DEC1W(Unsigned)
DEC2W (Unsigned)
DEC4W (Unsigned)
single precision real number
double-precision real number
DEC1W (signed)
DEC2W (signed)
DEC4W (signed)
*8 Only when > / < / ≧ / ≦ is selected for conditions.
Description
*7 Set conditions to occur trigger.
<Initial> formula: >
<Set range> formula: > / < / ≧ / ≦ / = / ≠
*7*8 Set conditions to recover trigger.
Set as condition value ≧ recovery value
<Initial> 0
0 to 65535
0 to 4294967295
0 to 18446744073709551615
significant figure 7 digits or less, decimal point 4 or less
significant figure 15 digits or less, decimal point 4 or
less
-32768 to 32767
-2147483648 to 2147483647
-9223372036854775808 to 9223372036854775807
value: 0
82
ELC500 Control unit