Panasonic ELC500 User Manual page 82

Item
(a) No.
(b) Name
(c) Specify connection device
(d) Expansion unit *1
(e) Protocol
(f) Communication method
(g) Port No.
(h) IP address *2
*1 Only when the connection device is KW2M. Do not set unless otherwise specified.
*2 Set IP address with no duplication.
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
Description
Registered unit number is displayed.
Set name for the connected device.
<Set range> 32-letter or less
Set type for the connected device.
<Initial> KW2M
<Set range> KW2M/ Other
Set when the connection device has expansion unit(s).
Set protocol of the connected device.
<Initial> MEWTOCOL-COM
<Set range>MEWTOCOL-COM / MODBUS TCP
Set communication method od the connected device.
<Initial> TCP/IP
<Set range>TCP/IP / UDP/IP
Set port number of LAN port of the connected device.
<Initial> 1
<Set range> 1 to 65535
Set IP address of the connected device.
74
ELC500 Control unit