Panasonic ELC500 User Manual page 68

Item
(g) IP address *2
(h) Port No.
(i) Disconnect time with no
communication
*1 When creating communication program by using FPWIN Pro7
*2 Only when Server connection (Specified) or Client connection is selected for open method.
■Open method (Server / Client)
Item
Server connection (Any destination)
Server connection (specified)
Client connection
■Open method (Automatically / Manually)
Item
Automatically
Manually
■In case of selecting 'Server connection (specified)' for 'Open method (Server / Client)'
Item
IP address
Port No.
Note
Either IP address or port number must be specified with except 0 (0,0,0,0).
■In case of selecting 'Client connection' for 'Open method (Server / Client)'
Item
IP address
Port No.
Description
Set IP address of the connected device.
*2 Set port number to use by the connected device.
<Initial> 0
<Set range> 0 to 65535 or 1 to 65535
Set disconnect time during the communication.
Disconnection time exceeds the set time, it will disconnect
automatically.
<Initial> 60 sec
<Set range>
Description
Wait for connections from unspecified clients.
Wait for connections from specified clients.
Connect to the destination port of server connection.
When it can't connect, it will be communication error.
Description
When power on, it opens the communication line with each device
according to system connection settings automatically.
<Client connection>
If it can't establish connection, it connects repeatedly at regularly.
<Serve connection>
Open the connection and wait for a connection from client.
In order to open connection manually, FPWIN Pro7 programming is
necessary.
Description
When IP address set to 0.0.0.0, it receives data from any destination.
When it set to except 0.0.0.0, it receives data from the specified destination.
When port number set to 0, it receives data from any destination.
When it to except 0, it receives data from the specified destination.
Description
Set IP address of destination. Except 0.0.0.0
Set port number of destination. Except 0
Open method (Client): 1 to 3600
Open method (Server): 0 to 3600
60
ELC500 Control unit