Panasonic ELC500 User Manual page 73

Item
(d) Baud rate
(e) Link relay / link register
memory block number to
use
(f) Maximum station No. to use
for PLC link
(g) Range of link relays used
(h) Range of link registers used Set range of link register to use for communication.
(i) Link relay transmission
start number
(j) Link relay transmission size
(k) Link register transmission
start number
(l) Link register transmission
size
Reference
FP7 User's manual (SCU communication)
Description
Set baud rate.
<Initial> 19200bps
<Set range> 300/ 600 / 1200 / 2400 / 4800 / 9600 / 19200 /
38400 / 57600 / 115200 / 230400bps
Set range by block for device number of used link relay, link
register.
<Initial> 0
<Set range> 0 / 1
Set maximum station number to connect PLC link.
<Initial> 0
<Set range> 0 to 16
Set range of link relay to use for communication.
<Initial> 0
<Set range> 0 to 64
<Initial> 0
<Set range> 0 to 128
Set transmission start number (header word number) of link
relay to use for communication.
<Initial> 0
<Set range> 0 to 63
Set transmission size of link relay to use for communication.
<Initial> 0
<Set range> 0 to 64
Set transmission start number (header word number) of link
register to use for communication.
<Initial> 0
<Set range> 0 to 127
Set transmission size of
communication.
<Initial> 0
<Set range> 0 to 127
65
ELC500 Control unit
link register to use for