Panasonic ELC500 User Manual page 128

Item
(h) Multiplier
(i) Number of decimal places
(j) Unit *5
*1 It displays communication I/F that device is registered.
*2 It displays registered devices.
*3 Only when DEC1W (Unsigned), DEC2W (Unsigned), DEC4W (Unsigned) is selected. When
DEC4W is selected, the number of significant digits of data is 15-digit.
*4 Only when [Diff.value] is selected. Set range differs according to data style.
DEC1W(Unsigned)
DEC2W (Unsigned)
DEC4W (Unsigned)
When reading a value smaller than the previous value, it calculates a differential value as it
assumes that the value was over the upper limit value and it changed value.
*5 Do not use double-quotation [ " ] .
Reference
Refer to the manual for each device about upper limit.
Note
- It the read out value is smaller than the previous value, it calculates demand value by
assumed that it exceeds the upper limit value. Set the upper limit correctly.
Description
Set conversion value of collecting data.
<Initial> 1
<Set range> 0.0001 to 9999.9999
It shows decimal point number for current value monitor, and
csv file.
<Initial> 0
<Set range> 0 to 4
Set unit. It doesn't have to be used.
<Set range> 8-letter or less
1 to 65535
1 to 4294967295
1 to 18446744073709551615
120
ELC500 Control unit