Panasonic ELC500 User Manual page 163

■When 2 or more cyclic control overlap
You can set 4 patterns of No.1 to No.4 for cyclic control. When the controls overlap, cyclic control
that occurs first has a priority.
(The below shows that during it executes cyclic control No.1, No.2 trigger occurs.)
Cyclic control
No.1 trigger
Cyclic control
No.2 trigger
Cyclic control is
executed
■When cyclic control overlaps alarm link control
During it executes cyclic control (Alarm 3 control), cyclic control has a priority. During it cancels
cyclic control (No alarm control), alarm link control has a priority.
Alarm 1
Alarm link control
No alarm
Alarm 3
Cyclic control
No alarm
Alarm 3
Alarm 1
Output status
No alarm
Note
Setting relay is the target for start control and cyclic control.
ON
OFF
ON
OFF
Control
Cancel
Cyclic control
155
Cyclic control
No.1
Alarm link control
ELC500 Control unit