Panasonic ELC500 User Manual page 33

■Exclusive tool for rod terminal
Manufacture
Phoenix Contact Co.
■Recommended cable for RS-232C transmission line
Type: Multi-conductor cable with shield
Size
2
0.3 mm (AWG22) or more
Cable diameter
Approx. 6.6 mm
■Recommended cable for RS-422 transmission line
Conductor
Cable
Size
1.25 mm
(AWG16)
Twisted-
or more
pair
with
2
0.5 mm
shield
(AWG20)
or more
0.75 mm
VCTF (AWG18)
or more
Cable
Twisted-pair
with shield
VCTF
Note
- Use shielded type twist cables.
- Use only one type of the transmission cable. Do not mix the different type of cable.
- Use twist pair cables under a bad noise environment.
- Be sure to connect with daisy chain the RS-485 transmission line between each unit.
Do not use a splitter.
Conductor
Resistance (at 20℃)
Max.58.8Ω/km
Applicable cable
Onamba
ONB-D6x0.3mm
Resistance
(at 20℃)
2
Max.16.8Ω/km Polyethylene
Polyethylene
Max.33.4Ω/km
2
Max.25.1Ω/km PVC
Section
Shield
Conductor
Conductor
Model No.
CRIMPFOX6(1212034)
chloroethylene
2
Conductor
Insulator
Material Thickness
Max.
0.5 mm
Max.
0.5 mm
Max.
0.6 mm
Jacket
Insulator
Jacket
Insulator
25
ELC500 Control unit
Insulator
Material Thickness
Max. 0.3 mm
Section
Shield Jacket
Insulator
Cable
Applicable cable
diameter
HITACHI
KPEV-S
Approx.
8.5 mm
1.25 mm
Belden Inc. 9860
HITACHI
KPEV-S
Approx.
7.8 mm 0.5 mm
Belden Inc. 9207
VCTF
Approx.
0.75 mm
6.6 mm
(JIS)
2
×1P
2
×1P
2
×2C