Panasonic ELC500 User Manual page 61

[3] FTP client
Set to use FTP client function
Item
(a) Use FTP Client function
(b) Add or Delete
(c) IP address or Hostname
(d) Port No.
(e) User name
(f) Password
(g) Use SSL3/TLS3
(h) Open method
(i) Connection timeout
(j) Retry interval
(k) Retry count
Description
Select use the function or not.
<Initial> without check = not available
Add FTP server setup. Up to 4 setups can be added.
Click [Add] to add setup.
Set IP address or name of the connected server.
<Set range> 256-letter or less
Set port number of the connected server.
<Initial> 21
<Set range> 1 to 65535
Set user name of the connected server.
<Set range> 32-letter or less
Set password for the connected server.
<Set range> 32-letter or less
Select use SSL3/TLS1 authentication or not.
<Initial> without check = not available
Set open method.
<Initial> Active
<Set range> Active / Passive
Set timeout time to disconnect the connection.
<Initial> 60 sec.
<Set range> 30 to 300
Set retry interval to send mail.
<Initial> 60 sec.
<Set range> 10 to 86400
Set retry number to send mail.
<Initial> 3 times
<Set range> 0 to 3
53
ELC500 Control unit
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)