Panasonic ELC500 User Manual page 95

■Basic setup
Set items related to logging data.
Item
(a) File name
(b) Logging trigger No.
(c) Saved file number
(d) Timing for create new file
*1 It can't use the below letters.
letter
¥ Yen
/ Slash
＼
Backslash
: Colon
; Semi-colon
. dot
Half-width space
(only the beginning)
Note
- If the number of registered devices to log is increased or if there is a wireless device in
the system, it is difficult to collect in short cycle and it may cause missing data.
- Be sure to set a cycle to record collected data longer than a cycle to collect data. If not, it
may cause missing data.
- When the number of record exceeds 65536 (including header), it can't open the file by
Excel 2003 or earlier version.
- Be sure to set logging trigger doesn't overlap new file creating timing. Of not, it may not
record correct data nor send mail nor upload files.
- If saved file number is changed to a number smaller than the previous, it deletes files
from the older file at the next time when it creates logging file.
Description
*1 Set name for logging file (csv).
<Set range>:32-letter or less
Set trigger to use for data logging.
It logs data to file at setting trigger.
Set number of saved logging file in the folder.
<Initial>100
<Set range> 1 to 100
Set timing for creating a logging file.
・Record number
At reach the setting record, it creates new logging file.
<Set range>: 1 to 100000
・Trigger
At setting trigger is occurs, it creates new logging file.
name letter
(a)
(b)
(c)
(d)
Name
* Asterisk
? Question mark
' Double quotation
< Inequality sign
> Inequality sign
| pipe
87
ELC500 Control unit